zsaqwwwrbwbzwdeceezdfq

Log In

BMW HP4 MOTORRAD Motorcycles for Sale in North Carolina

Featured
Only 1 match found.
Sort By
Premium
Nearest
Recent
High $
Low $
Newest
Oldest
Loading your results...
Hello, this is a BMW HP4 model 2013 - COMPETITION; it has 3900 miles and in excellent conditions; I have all the stock parts that are not pictured (carbon body work, lights, controls etc) to make it "street legal", and in addition, please look at the following after market parts:1.  Extra set of carbon fiber BST wheels;2.  Rotors preinstalled on front and rear carbon wheels - one extra sproket for the BST rear wheel;3.  GPS Starlane lap-timer4.  MotoGP rebound sensor 2D5.  Race "motoholder" subframe and fairing stay;6.  HM - MotoGP quickshifter 7.  Race Bodywork8.  Endurance gas tank with related quickfiller cap and gas can 9.  Ohlins stearing Damper10.Fuel ignition module - power commander11.Extra battery - GEL superbike12.1 quarter turn "Alpha Racing" quick throttle13.Alpha Racing "on the fly" traction controls and race mode selectors14.Brembo master cylinder15.Woodcraft engine covers and related sliders16.I will through in a "BMW" race suit and glovesPlease note the value of the above accessories - well over $ 15,000.  If interested please email me at alfreb@icloud.com or call/text at 828 308 5556Thank You all for looking.Alfredo

$22,000

3,949 miles
Private Seller
Granite Falls, NC

You might like these other BMW Motorcycles.

2018 BMW HP4 RACE, 215 HP, 378 lbs. wet weight... HELLO! These will not be in dealers inventory, there are only available by customer order. The US market will only be allocated approximately 80 of the total production of 750 units. Orders will be filled on a first in, first out basis, until supply is exhausted. Dealers are not being allowed to pre-order units to “have in stock”, the only way to put one of these beasts under you is through the pre-order process. Shipping with a motorcycle specific vendor (that we use regularly sans complication), fully insured ($80K), has been quoted to me at $1,000+/- based on shipping from Charlotte to Milwaukee as a baseline, actual location will be a small variable in that cost. Our ordering process: We are charging a non-refundable ordering fee of $7,500, to place an order with BMW in the customer’s name. We will apply the $7,500 to the balance at the final closing/delivery, as long as the motorcycle is paid for, in full, within 15 days of it being placed in our inventory (when it ships from central distribution in NJ, to our dealership, and we are invoiced). If BMW is unable to fulfil a customer’s order, the ordering fee will be refunded in full. HP4 Race Standard Features and Specifications Volume is limited to 750 consecutively-numbered units worldwide Milled fork bridge with carbon badge (numbered 001/750 to 750/750) DIN wet weight 377 lbs (171 kg) Dry weight 322 lbs (146 kg) 999 cc, 4 cylinder, water/oil cooled HP4 RACE factory engine 215 hp, 88 lb-ft of torque (120 Nm) Reinforced WSBK transmission, longer first and second gear Titanium bolts used throughout to save weight Brembo GP 4 PR brake calipers 6.75 mm brake disc thickness Highly precise and steady brake pressure points Brembo radial brake master cylinder Carbon front wheel: 1.7 lbs (770 g) lighter than forged wheel Carbon rear wheel: 1.7 lbs (770 g) lighter than forged wheel Öhlins FGR forks from the WSBK (fully adjustable) Variable fork bridge offset: 28 - 30 mm and 26 - 32 mm Steering head angle adjustment from -0.5° to +1° HP brake and clutch levers Milled aluminum switches Racing wiring harness prepared for 2D linear position sensor Unitary HP carbon front RTM carbon frame (Carbondrive) 17 lbs (-9 lbs vs. RR) Lohmann HP Shift Assist Pro Brushed and polished aluminum tank Unitary HP carbon rear 32.7” HP race seat, adjustable from 32.1” 33.3” One-piece carbon intake silencer and side trim panel Carbon race engine spoiler Complete carbon trim panel Milled HP footrest system: 8-way adjustable Öhlins TTX 36 GP rear shock Two plates to adjust spri
Request Price

Call For Price

BMW-Ducati-Triumph-MV Agusta MC of Charlotte
Charlotte, NC
Stock Number: HP4RACE1
Hello, this is a BMW HP4 model 2013 - COMPETITION; it has 3900 miles and in excellent conditions; I have all the stock parts that are not pictured (carbon body work, lights, controls etc) to make it "street legal", and in addition, please look at the following after market parts:1.  Extra set of carbon fiber BST wheels;2.  Rotors preinstalled on front and rear carbon wheels - one extra sproket for the BST rear wheel;3.  GPS Starlane lap-timer4.  MotoGP rebound sensor 2D5.  Race "motoholder" subframe and fairing stay;6.  HM - MotoGP quickshifter 7.  Race Bodywork8.  Endurance gas tank with related quickfiller cap and gas can 9.  Ohlins stearing Damper10.Fuel ignition module - power commander11.Extra battery - GEL superbike12.1 quarter turn "Alpha Racing" quick throttle13.Alpha Racing "on the fly" traction controls and race mode selectors14.Brembo master cylinder15.Woodcraft engine covers and related sliders16.I will through in a "BMW" race suit and glovesPlease note the value of the above accessories - well over $ 15,000.  If interested please email me at alfreb@icloud.com or call/text at 828 308 5556Thank You all for looking.Alfredo

$22,000

3,949 miles
Private Seller
Granite Falls, NC
Moatads image Cloudfront image